The main belt, which is going to be locked around the sissy’s waist is the major part of the belt.

There are more accessories to go with the belt which are the clitty tube, the front shield, the rear shield and the locks to which the sissy will never have access.

If wanted or necessary there are different styles and sizes of plugs which can be added to the belt. The rear shield shown in the picture above is meant to hold any kind of plug in place.

 

Before using the belt it has to be properly cleaned. As the belt has many edges and slits an old toothbrush can do wonders.

To clean the belt you ought to use a perfume-free or medical soap.

Of course the sissy has to be cleaned as well for locking her up for a period of time of Your choice.

 

As next the silicone lining of the belt should be treated with a perfume-free ointment or cream.

The same has to be done with the tube that is meant to hold the sissy’s clitty safely and inaccessible in place.

 

At first the unlocked sissy needs to cover her pathetic clitty with the end of a stocking. There are other ways to pull the clitty inside the tube such as using a cord.

 

Simultaneously the sissy’s rear should be plugged even though this can be done later as well.

The main belt is now to be placed around the sissy’s waist. This can be done in upright position but if You prefer it can be done while your sissy is locked to the bed as well.

 

The tube has now to be pulled over the clitty by the use of the stocking. It must be well inserted and the top ring of the tube should now rest flat and held tightly against the sissy’s pubic bone.

As next the pin at the front of the tube has to be hooked into the slid of the front part of the main belt.

Eventually the waist belt, the front part and the tube will be held together by three pins and matching holes.

The pin in the middle is larger and will be used to accommodate the lock as we can see later.

 

Eventually the front shield must be hooked to the D-ring at the bottom of the belt. It is mainly to make the shemale belt looking like a female belt and thus has an optical purpose only.

At the top of the shield is a little hole that goes into the middle pin so it can be locked as well.

The last thing to do is to place the lock over the middle pin and shut the lock.

 

If available the thigh bands are now to be locked to the sissy’s thighs.

 

The chains now have to be locked to the d-rings at the side of the chastity belt.

Eventually the rear shield must be placed over the butt plug and locked to the belt by a little pin that works in the same way as the main lock in the front of the belt.

Your sissy is now safely locked up!

More blog entries:

Adventures ...	A maid in ... ...	10 Steps ...	Caught ...	Sissy ...
How to ...	Coming soon ...